|
Toyota RAV 4
(10/08 On Models) |
|
 |
|
BIG TUBE
BAR - Bumper Over
Mirror Polished Alloy |
|
ECB is
proud to announce the release of the Big Tube Bar designed
exclusively to fit the Toyota RAV4. This new dimensional Big Tube
Bar wraps around in front of the existing front bumper bar, ensuring
a neat fit and appealing design without compromising on strength or
the integrity of the vehicle. The RAV4 Big Tube Bar is manufactured
from high tensile, structural grade alloys and features fully
gusseted 63mm headlight tubes. The tapered one-piece bumper
incorporates a full width, braced Lower Protection Skirt while a
specifically designed, dual location steel mounting system ensures a neat and
sturdy fitment, to either 4 or 6 cylinder vehicles, for the ultimate in protection. The tow points have
now been relocated to below the bumper. Indicator/Park Light
Combinations, Air Directional Cooling Vents, Driving Light mounting
points, ECB Bumper Lights and an Aerial Bracket are all standard
features. |
|
(01/06 On Models) |
|
 |
TYPE 8 BAR -
Mirror Polished Alloy
|
 |
TYPE 8 BAR -
Silver Ripple Powder Coated Alloy
|
|
The tubular construction of the Type 8 Bar contours
perfectly to suit the Rav's aerodynamic styling. Manufactured from
high tensile alloys, the Type 8 Bar incorporates lower bracings
providing additional loop support for optimum frontal protection. A
steel mounting system ensures a neat and sturdy fitment while
driving light mounting provisions are standard inclusions.
For
a superior low maintenance finish where bugs wash off easily, why
not choose from ECB’s range of superior, low maintenance powder
coated finishes? A durable cost saving alternative to polishing.
|
 |
63MM SERIES 2 NUDGE BAR -
Mirror Polished Alloy
|
 |
63MM SERIES 2 NUDGE BAR -
Mirror Polished Alloy |
|
Great sports styling, bumper and grille protection
are just a few of the features of this modern and functional 63mm
Series 2 Nudge Bar. Formed from high tensile alloy tubing and
with a lower centre tube for maximum radiator protection, this Nudge
Bar has equal or better strength than poor quality, thinner
sectioned, imported stainless steel products and is up to 50%
lighter in weight. Spotlight mounting provisions together with a
choice of finishes are standard inclusions.
|
 |
76MM NUDGE BAR -
Mirror Polished Alloy
|
 |
76MM NUDGE BAR -
Mirror Polished Alloy
|
|
Impact protection from those unexpected around town bumps is just
one of the benefits of this eye-catching Nudge Bar. Designed
and manufactured in Australia to suit our harsh Australian
conditions, this 76mm x 4.7mm Nudge Bar is formed from high tensile
alloy tubing and will never corrode or rust. It also has equal or
better strength than poor quality, thinner sectioned, imported
stainless steel products and are up to 50% lighter in weight. Each ECB Nudge Bar is designed to suit each individual model; therefore
you can be assured of an aesthetically pleasing, functional and
reliable design. The 76mm Nudge Bar comes complete with spotlight
mounting provisions, together with a great choice of finishes. |
|
(7/00-12/05 Models)
|
|
 |
TYPE 8
BAR -
Silver Hammertone Powder Coated Alloy
|
|
The tubular construction of the Type 8 Bar contours perfectly to suit
the Rav’s aerodynamic styling. Manufactured from high tensile alloys,
the Type 8 Bar provides optimum frontal protection for the bumper,
grille and headlights. The Type 8 Bar fits neatly with
steel mounting brackets. Driving light mounting provisions are
standard inclusions and for a superior low maintenance finish where
bugs wash off easily, why not choose from ECB’s range of superior, low
maintenance powder coated finishes? A durable alternative to
polishing.
|
|
MIDI
TUBE BAR -
Mirror
Polished Alloy
|
MIDI TUBE BAR -
Silver
Ripple Powder Coated Alloy
|
The Midi Tube Bar is an aerodynamic combination of grille and full
bumper protection in a unique yet practical design. The use of high
tensile 76mm and 44mm alloys is designed to both enhance the RAV4’s
sports styling and to provide optimum product performance. An extra
centre tube is incorporated providing protection to the under side
of the vehicle. Driving light mounting provisions are standard
inclusions.
For a superior low maintenance finish where bugs wash off easily,
why not choose from ECB’s range of superior, low maintenance powder
coated finishes? A durable alternative to polishing.
|
|
 |
63MM SERIES 2 NUDGE BAR -
Mirror Polished Alloy
|
|
Great sports styling, bumper and grille protection are just a few of
the features of this modern and functional 63mm Series 2 Nudge Bar.
Formed from high tensile alloy tubing, with a lower centre tube for
maximum radiator protection, these Nudge Bars have equal or better
strength than poor quality, thinner sectioned, imported stainless
steel products and are up to 50% lighter in weight. Spotlight
mounting provisions together with a choice of finishes are standard
inclusions. |
|
 |
76MM NUDGE BAR -
Mirror Polished Alloy
|
|
Impact protection from those unexpected around town bumps is just
one of the benefits of this eye-catching Nudge Bar. Designed and
manufactured in Australia to suit our harsh Australian conditions,
this 76mm Nudge Bar is formed from high tensile alloy tubing and
will never corrode or rust. It also has equal or better strength
than poor quality, thinner sectioned, imported stainless steel
products and is up to 50% lighter in weight. Each ECB Nudge Bar is
designed to suit each individual model; therefore you can be assured
of an aesthetically pleasing, functional and reliable design. The
63mm Nudge Bar comes complete with spotlight mounting provisions,
together with a choice of polished or powder coated alloy finishes.
|
|
(7/94-6/00
Models)
|
|

|
MIDI
TUBE BAR -
Mirror
Polished Alloy
|
|
The Midi Tube Bar is an aerodynamic combination of grille and full
bumper protection in a unique yet practical design. The use of high
tensile 76mm and 63mm alloys is designed to both enhance the Rav’s
sports styling and to provide optimum product performance. An extra
centre tube is incorporated providing protection to the under side
of the vehicle. Driving light mounting provisions are standard
inclusions. For a superior low maintenance finish where bugs wash off easily,
why not choose from ECB’s range of superior, low maintenance powder
coated finishes? A durable alternative to polishing. |
 |
76MM NUDGE BAR -
Mirror
Polished Alloy
|
|
Impact protection from those unexpected around town bumps is just
one of the benefits of this eye-catching Nudge Bar. Designed and
manufactured in Australia to suit our harsh Australian conditions,
this 76mm Nudge Bar is formed from high tensile alloy tubing and
will never corrode or rust. It also has equal or better strength
than poor quality, thinner sectioned, imported stainless steel
products and is up to 50% lighter in weight. Each ECB Nudge Bar is
designed to suit each individual model; therefore you can be assured
of an aesthetically pleasing, functional and reliable design. The
63mm Nudge Bar comes complete with spotlight mounting provisions,
together with a choice of polished or powder coated alloy finishes.
|